TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was created by two guys in California. They wanted to create a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.
The Smok Pen includes a built quality that’s just great. I came across that even though it is an electronic pen the construction is simply as good as any of the pens that I have reviewed. It is because of how they made the very best cap. You don’t have to be worried about the cap cracking or breaking on you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens may be the shape of the coils and the way that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I believe that they did this on purpose, to make the pen feel bigger.
If you take a glance at a Smok Pen, you will observe that the body of the pen is round rather than smooth like other pens. On the back of the pen you will find a little tab that houses the coil. Once you press on the tab it is simple to turn the heating element on and off. I must say i liked this feature because it allows me to utilize the Smok Pen 22 whenever I feel like smoking.
To use the Smok Pen it is advisable to keep carefully the heat button pressed. Once the button is pressed, the heating element will begin to warm up. Once it reaches the appropriate temperature you can switch off the heating element. Smok Vape Shop recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.
Once you put your Smok Pen in to the tank you will notice a indicator light come on. The indicator light will remain green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids in to the coil heads.
After you have completed this step, it is best to check to see in case you are at the proper temperature for the coils to fire. If not then you should turn the power off and try again. In case you are still not satisfied together with your Smok Pen i quickly suggest you take it set for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just usually do not work as they should. I would recommend that you perform the next two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.
Before you go any further you should take away the battery from your pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. After you have loosened this wire after that you can access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful to not touch the coils.
After you have placed the sub-ohm tank into the pen you should then place the rest of the components including the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.
Once the Smok Pen has already reached the temperature that it requires to reach you should then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s on / off switch.
After all the components have been placed in to the pen, you should turn the power on. After the first test run, you should be able to start to see the battery life indicator light come on. If you don’t see any sign of life from the Smok Pen, you need to remove the battery from the pen and replace it with a brand new one. For your convenience gleam green light that could be pressed to be able to confirm the battery charging status. If you have done these things and you also do not see the green light indicating charging, you need to replace the battery.